Greyscale
Our blog post today inadvertently consists of multiple shades of white and grey. Not fifty shades, thankfully, seeing as how we already used that pun.
Thursday Mish-Mash
It’s nearing the end of the week, so once again we find ourselves with a slew of random photos from around the shop this week.
Long And Short
Some cars roll through our garage for only a little bit, whereas some will have a more extended stay at FMU HQ. Here’s a sampling of both.
The Big Reveal
Today, we’re finally releasing pictures of our esteemed Fluid MotorUnion X5 into the wild. But first, there’s an exhaust that begs to be mentioned.
Middle East Tuning
The other night we did some tuning work on a MkIV Supra that we expect to see close to 800rwhp on. We made considerable progress and were just about wrapped up with fuel maps when the head gasket let go between cylinders 5 and 6. We discovered, much to our relief, that it had been [...]
blog
- Timing, its everything.Today, let’s start off with a [...]
- An Introduction A [...]
- Andrew Krok - A RetrospectiveToday, your humble narrator breaks through [...]
- Head(er)s Up!The shop’s a little blue today. [...]
- So Fresh And So CleanTo cap off the week, we’ll [...]
- More blog
Category
Blogroll
- Extrude Hone Fluid MotorUnion is an official dealer for ExtrudeHone. ExtrudeHone uses the Abrasive Flow Machining (AFM) process to smooth internal passage ways and provide exceptional air/fuel flow for increased volume and velocity.
- Jalopnik Obsessed with the Cult of Cars
- Speedhunters Car Culture from across the globe
- StanceWorks Low is a Lifestyle
