A look around our new shop!
Some stills around the new shop!
More Freshness & Cleanliness
The super clean E28 M5 is here again. It really is a stunning example of a mint E28. We know that the time and effort that can go into simply maintaining cars like this can really add up. My hat’s off to guys who keep a car with this many years and 100,000 plus miles [...]
Gold Wheels: I Need More Wavelength
Fluid MotorUnion is taking velocity stacks to a whole new level. Here’s some snaps of the new units fitted and tacked. If the anodizing works out gold wheels may have stacks to match. And if the intake sound made you smile before…this may result in unadulterated schoolgirl giddiness.
E46 M3 Muffler Section
This is the muffler section of the custom exhaust we did for Jose’s M3. We did a full 3 1/2 inch midsection out to this muffler setup. It probably has enough capacity to support double the current power output but the goal was a deep tone without any rasp. It sounds great. Next to M.Burroughs’ [...]
C32 Update: Back on the dyno!
Well ladies and gents the C32 is back on the dyno!
I apologize for the “road speed” graph but baseline dyno’s were taken with ignition tacho while these last few runs were taken via “roller tach”. As soon as we sort out to final file we will make sure a proper graph is posted!
blog
- TGIFMUIt’s Friday. Despite what Rebecca [...]
- Erick’s SL65 AMG On The Dyno!The following video is meant to [...]
- From The Ground UpSometimes you need to work a [...]
- Placement Is KeyIf you didn’t check out yesterday’s [...]
- Pro TipsWe at Fluid MotorUnion tend to [...]
- More blog
Category
Blogroll
- Extrude Hone Fluid MotorUnion is an official dealer for ExtrudeHone. ExtrudeHone uses the Abrasive Flow Machining (AFM) process to smooth internal passage ways and provide exceptional air/fuel flow for increased volume and velocity.
- Jalopnik Obsessed with the Cult of Cars
- Speedhunters Car Culture from across the globe
- StanceWorks Low is a Lifestyle
